Click on the image to check the artwork
Product Introduction:2 Phase Stepper Motor Nema 23 Series
ECON offers high quality 2 phase 1.8° stepper motor which is made of high quality cold roll sheet copper and anti-high temperature permanent magnet. Those 2 phase stepper motors are available in frame size Nema17,23, 34, or 42, with holding torque of 0.4 to 30N.M. ECON’s 2 phase stepper motors are highly reliable and low heating. They can move smoothly & quietly without no obvious resonance areas in the whole speed range.
Product Technique Feature:2 Phase Stepper Motor Nema 23 Series
Step Accuracy 5%
Step Angle 1.8º
Insulation resistance 500VDC100MΩ Min
Insulating strength 500VAC 50Hz 1mA 1 Min
Environment temperature -20~+40ºC
Temperature rise 80ºC Max
Insulation grade B
Dimension
QL57HD56-2006
|
Model |
Shaft diameter (mm) |
Shaft extension(mm) |
Shaft Length(mm) |
|
QL57HB56-055 |
6.35 |
Flat 0.5x19.5 |
20.6 |
|
QL57HD51-101 |
6.35 |
Flat 0.5x19.5 |
20.6 |
|
QL57HD56-2006 |
6.35 |
Flat 0.5x19.5 |
20.6 |
|
QL57HB56-0384A |
8 |
Flat 0.5x19.5 |
20.6 |
|
QL57HB76-034A |
6.35 |
Flat 0.5x19.5 |
20.6 |
|
QL57HB76-0384A |
8 |
Flat 0.5x19.5 |
20.6 |
|
QL57HD112-280 |
6.35 |
Flat 0.5x19.5 |
20.6 |
Product Technical Data:2 Phase Stepper Motor Nema 23 Series
|
Model |
Holding torque (N.M) |
Current/Phase (A) |
Resistance (Ω) |
Inductance (MH) |
Rotary inertia(g.cm²) |
Length (MM) |
Weight (Kg) |
Lead |
The matched drive |
|
QL57HD41-055 |
0.55 |
2.8 |
0.7 |
1.4 |
150 |
41 |
0.47 |
4 |
DH542/DH556 |
|
QL57HD51-101 |
1.01 |
2.8 |
0.83 |
2.2 |
280 |
51 |
0.68 |
4 |
DH542/DH556 |
|
QL57HD56-2006 |
0.9 |
2.0 |
1.8 |
2.5 |
280 |